![]() Let Roomba cool down for at least one hour and try charging again.If the message persists, contact iRobot Customer Care.Ĭharging error 6 means your Roomba is not charging because the battery is too warm or hot. Reinstall the battery and replace the bottom cover and battery door, and then place Roomba back on the Home Base to try charging again.This has been shown to be a proven method to fully remove debris from the charging contacts. If any is found, use lightly dampened melamine foam, such as a Magic Eraser, to clean the charging contacts on the Home Base and robot. Check if there has been any buildup of debris or dirt on the charging contacts of the Home Base and the robot.Gently wipe the battery contacts with a clean, dampened melamine foam, such as a Magic Eraser. ![]() To access the battery, refer to the following images for the location of the screws that secures the battery door or bottom cover to the robot. Remove the battery and look for anything that may be obstructing the battery contacts, such as the yellow battery pull tab.Ensure proper contact between the battery and robot.You can learn how to remove and replace a Roomba battery right here. If you recently received a service robot, ensure the original battery is installed. Charging errors can occur with counterfeit batteries. Check that you are using an authentic iRobot Lithium Ion Battery.If you are experiencing a Roomba charging error 1, please do the following: Charging error 1: Battery is not connected or detectedĬharging error 1 means the battery is not connected or the battery is not detected. When a Roomba I, E, and J Series experiences a charging error, it will tell you something is wrong with the light ring turning red followed by a narrated voice.Ī message or notification may also appear in the iRobot HOME app. Roomba® 500, 600, 700, and 800 series says “Charging error (number).”.Please open the iRobot HOME App for help.” Wi-Fi connected Roomba 600 and 800 series says “Charging error (number).Roomba 900 series says “Charging error (number).When a Roomba 500, 600, 700, 800, and 900 Series experiences a charging error, it will tell you something is wrong with a blinking troubleshooting, CLEAN, or battery indicator and a two-tone “uh-oh” sound followed by a narrated voice. The charging error troubleshooting guide below applies to all Roomba models, including the Roomba 500, 600, 700, 800, 900, I, E, and J Series.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |